Hard water in many Twin Cities homes shortens the life of water heaters by coating elements and clogging valves. Over time, mineral buildup forces the unit to work harder, raising energy use and cutting efficiency.

Peterson Salt installs and replaces high-efficiency systems designed to work with your existing plumbing and water softener, so heat transfer stays clean and steady. Our licensed installers handle setup and testing on-site, giving homeowners steady hot water without the wear that hard water causes across Minnesota.

Professional Water Heater Installation Service

A proper installation goes beyond connecting pipes. Our technicians size the tank for your household, mount it securely, and ensure venting and drainage meet Minnesota code. Connections for cold-water inlets, hot-water outlets, and pressure relief valves are checked before activation. We also remove and haul away the old heater so the new one starts clean and trouble-free.

At Peterson Salt Company, we install gas, electric, tankless, and heat-pump systems found across the Twin Cities. The work is adjusted to your home’s plumbing layout and water conditions, giving the unit balanced flow, full heating capacity, and long-term reliability.

Tankless water heater installation in Twin Cities Minnesotta - Peterson Salt & Water Treatment Company

Gas Water Heater Installation

Gas models heat water quickly but must be installed with correct venting and gas line checks. Our team sets up new tanks with sealed fittings, verifies combustion airflow, and adjusts temperature controls for safety and efficiency.

In many Twin Cities basements, proper vent slope and airflow prevent carbon buildup and protect nearby fixtures from heat exposure. We follow local code for line pressure testing and ensure the burner runs clean before the system goes live.

Electric Water Heater Installation

Electric units suit homes that prefer quiet, low-emission operation. We wire elements to your service panel, confirm voltage and breaker size, and run inlet and outlet lines to maintain balanced flow. Every connection is leak-tested before startup.

These systems pair well with softened water, which helps heating elements stay clean and reduces strain on electrical parts. Our installers also secure grounding and bonding connections to meet Minnesota’s residential electrical standards.

Tankless Water Heater Installation

Tankless systems deliver hot water on demand and save floor space. We install wall-mounted units, set the temperature limits, and configure gas or electrical supply for consistent flow. Softened water keeps their heating coils free from mineral scaling, extending service life.

Before installation, we evaluate flow rate, venting path, and access to electrical or gas supply to avoid pressure loss during peak demand. The system is then flushed and tested for proper ignition and temperature stability.

Heat Pump & Hybrid Systems

Heat pump heaters draw warmth from the surrounding air to produce hot water efficiently. They are ideal for basements or utility rooms with stable temperatures. Our installers handle refrigerant safety checks and make sure drainage and electrical circuits meet manufacturer standards.

We measure ambient air volume and insulation to confirm that the room supports consistent heat exchange. This setup works best when paired with softened water, which limits mineral buildup on the evaporator and heat exchanger surfaces.

New Tankless water heater installation in Hopkins MN by Peterson Salt Company
Electric Water Heater installation service in Twin City Metro, Hopkins, MN- Peterson Salt Company

Water Heater Replacement Services

When a tank leaks, rusts, or takes too long to reheat, replacing it often saves more energy and money than constant repairs. We remove the old heater, assess your water usage, and install a new model that fits both your plumbing and household demand. Same-day service is available for failed units, so you are not left without hot water overnight.

Water Heater Repair & Plumbing Support

Not every issue requires a new heater. We troubleshoot thermostat faults, heating elements, and pilot lights, restoring proper operation when possible. If the problem stems from mineral buildup or ageing components, we will show you repair options and, when it makes sense, guide you toward replacement.

Water Heater Installation Cost & Value

Installation costs vary by tank type, size, and venting style. We provide clear pricing after inspection and explain how softened water reduces future maintenance costs. Efficient setups use less energy, last longer, and protect fixtures from scale damage.

Across Minnesota, the cost to install a standard tank-style water heater typically ranges from $1,200 to $2,400, including removal of the old unit and setup to current code. Tankless and heat pump systems often start near $2,800 and can reach $4,500 depending on home layout and venting requirements.

During inspection, we outline multiple options clearly so you can understand labour, materials, and warranty coverage before any work begins. Soft water plays a major role in protecting that investment, helping the system hold its efficiency and reducing repair frequency over time.

How Water Quality Affects Heater Lifespan

Hard water minerals settle at the bottom of tanks, forcing elements to overheat and fail early. Pairing your new heater with a tuned softening system keeps mineral buildup low, heating surfaces clean, and energy use steady. Regular maintenance and water testing help the system run efficiently through Minnesota’s changing seasons.

Most Twin Cities water is drawn from the Prairie du Chien-Jordan aquifer, averaging 16-18 grains of hardness per gallon. In areas like Apple Valley and Burnsville, that mineral load can shorten heater life by several years. Softened water prevents scale from forming, allowing the tank to heat evenly and operate at full capacity for much longer.

Frequently Asked Questions

Who installs water heaters?

Licensed plumbers and trained installers handle new heater setups to ensure safe venting and code compliance.

How to install an electric water heater?

It requires electrical connections, grounded wiring, and sealed inlet and outlet lines. A professional should perform these steps to avoid safety risks.

How much does it cost to install a water heater?

Pricing depends on tank size, fuel type, and access to existing plumbing. After inspection, we provide a written estimate that includes the removal of the old unit. In most Minnesota homes, installation typically ranges from $1,200 to $2,400.

How long does a water heater last with soft water?

Typically, 12-15 years, since softened water prevents scale buildup on elements and in tanks.

REQUEST SERVICE

Need help with your water softener system? Whether you’re dealing with hard water issues, a malfunctioning unit, or you’re ready for a new installation, our team is here to help. Fill out the form below—we’ll take care of the rest.

  • This field is for validation purposes and should be left unchanged.

Place an order online and let Peterson Salt solve your salt needs today.

NEED A SALT DELIVERY?

Still have questions? We’re here to help!

CONTACT US

Frequently Asked Questions

Who installs water heaters?

Licensed plumbers and trained installers handle new heater setups to ensure safe venting and code compliance.

How to install an electric water heater?

It requires electrical connections, grounded wiring, and sealed inlet and outlet lines. A professional should perform these steps to avoid safety risks.

How much does it cost to install a water heater?

Pricing depends on tank size, fuel type, and access to existing plumbing. After inspection, we provide a written estimate that includes removal of the old unit. In most Minnesota homes, installation typically ranges from $1,200 to $2,400.How long does a water heater last with soft water?

Typically, 12-15 years, since softened water prevents scale buildup on elements and in tanks.